MATLAB在Mac / Linux / Windows上创建串行端口
示例
% Define serial port with a baud rate of 115200
rate = 115200;
if ispc
s = serial('COM1', 'BaudRate',rate);
elseif ismac
% Note that on OSX the serial device is uniquely enumerated. You will
% have to look at /dev/tty.* to discover the exact signature of your
% serial device
s = serial('/dev/tty.usbserial-A104VFT7', 'BaudRate',rate);
elseif isunix
s = serial('/dev/ttyusb0', 'BaudRate',rate);
end
% Set the input buffer size to 1,000,000 bytes (default: 512 bytes).
s.InputBufferSize = 1000000;
% Open serial port
fopen(s);
热门推荐
10 圣诞祝福语简短小学
11 祖国七十华诞简短祝福语
12 老师送的祝福语简短
13 生日祝福语大全女生简短
14 祝女性生日祝福语简短
15 牛年女神节祝福语简短
16 情人表白祝福语简短大气
17 老公开业祝福语简短
18 官宣新年祝福语简短