对Python 网络设备巡检脚本的实例讲解

2023-09-13 20:52:05 77

1、基本信息

我公司之前采用的是人工巡检，但奈何有大量网络设备，往往巡检需要花掉一上午（还是手速快的话）,浪费时间浪费生命。

这段时间正好在学Python，于是乎想(其)要(实)解(就)放(是)双(懒)手。

好了，脚本很长又比较挫，有耐心就看看吧。

需要巡检的设备如下：

设备清单

设备型号

防火墙

华为E8000E

H3CM9006

飞塔FG3950B

交换机

华为S9306

H3CS12508

CiscoN7K

路由器

华为NE40E

负载

RadwareRD5412

RadwareRD6420

2、采集数据并写入文件

#相关设备巡检命令就不介绍了。。。

01DMZ-E8000E.py#华为E8000E交互脚本

#!/usr/bin/envpython
importpexpect
importsys
importdatetime

d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b%d')
today=datetime.date.today().strftime('%Y%m%d')

tt=tdy.split()
ifint(tt[-1])<10:
tdy=tdy.replace('0','')

ip=str(sys.argv[1])
passwd=str(sys.argv[2])
password=str(sys.argv[3])

child=pexpect.spawn('ssh用户名@%s'%ip)
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/01DMZ-E8000E.txt','w')
child.logfile=fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect('(?i)E8000E-1>')
child.sendline("su")
child.expect("(?i)assword:")
child.sendline("%s"%password)
child.expect("(?i)E8000E-1>")
child.sendline("disdevice|exNormal")
child.expect("(?i)E8000E-1>")
child.sendline("disversion")
index=child.expect(["(?i)----More----","(?i)E8000E-1>"])
if(index==0):
child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("distemperature")
child.expect("(?i)E8000E-1>")
child.sendline("dir")
index=child.expect(["(?i)----More----","(?i)E8000E-1>"])
if(index==0):
child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("dismemory-usage")
child.expect("(?i)E8000E-1>")
child.sendline("dishrpstate")
child.expect("(?i)E8000E-1>")
child.sendline("disfirewallsessiontable")
index=child.expect(["(?i)----More----","(?i)E8000E-1>"])
if(index==0):
child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("disiprouting-tableprotocolstatic")
child.expect("(?i)E8000E-1>")
child.sendline("disintbrief|inup")
child.expect("(?i)E8000E-1>")
child.sendline("disacl3004")
index=child.expect(["(?i)----More----","(?i)E8000E-1>"])
if(index==0):
child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("disacl3005")
index=child.expect(["(?i)----More----","(?i)E8000E-1>"])
if(index==0):
child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("disacl3006")
index=child.expect(["(?i)----More----","(?i)E8000E-1>"])
if(index==0):
child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("disacl3007")
index=child.expect(["(?i)----More----","(?i)E8000E-1>"])
if(index==0):
child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("disalarmall")
child.expect("(?i)E8000E-1>")
child.sendline("dislogbuffer|in%s"%tdy)
foriinrange(20):
index=child.expect(["(?i)----More----","(?i)E8000E-1>"])
if(index==0):
child.send("")
else:
child.sendline("q")
break

02_03-M9006.py#H3CM9006交互脚本

#!/usr/bin/envpython
importpexpect
importsys
importdatetime
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b')
today=datetime.date.today().strftime('%Y%m%d')

ip=str(sys.argv[1])
passwd=str(sys.argv[2])
password=str(sys.argv[3])


ifip=='判断ip，手动打码':
txt='03SM-M9006.txt'
else:
txt='02DMZ-M9006.txt'

child=pexpect.spawn('ssh用户名@%s'%ip)
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile=fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect('(?i)M9006>')
child.sendline("su")
child.expect("(?i)assword:")
child.sendline("%s"%password)
child.expect("M9006>")
child.sendline("disdevice|exNormal")
child.expect("M9006>")
child.sendline("disversion|inuptime")
child.expect("M9006>")
child.sendline("disenvironment")
foriinrange(10):
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
else:
child.sendline("dir|intotal")
break
child.expect("M9006>")
child.sendline("dismemory")
foriinrange(10):
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
else:
child.sendline("disirflink")
break
child.expect("M9006>")
child.sendline("disredundancygroup")
child.expect("----More----")
child.send('a')
child.expect("M9006>")
child.sendline("dissessionstatisticssummary")
child.expect("M9006>")
child.sendline("disiprouting-tableprotocolstatic")
child.expect("M9006>")
child.sendline("disintbrief|inUP")
foriinrange(10):
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
else:
break
ifip=='判断ip':
child.sendline("disacl3001")
foriinrange(10):
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
else:
child.sendline("disacl3002")
child.expect("M9006>")
child.sendline("disalarm")
break
else:
child.sendline("disobject-policyip")
foriinrange(20):
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
else:
child.sendline("disalarm")
break
child.expect("M9006>")
child.sendline("dislogbufferreverse|in%s"%tdy)
index=child.expect(["(?i)----More----","M9006>"])这边其实只要一个for循环就可以了，不高兴改了
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("a")
index=child.expect(["(?i)----More----","M9006>"])
if(index==0):
child.send("a")
else:
child.sendline('')
child.expect("M9006>")
child.sendline("q")

04IN-FG3950B.py#飞塔FG3950B交互脚本

#!/usr/bin/envpython
importpexpect
importsys
importdatetime
today=datetime.date.today().strftime('%Y%m%d')

ip=str(sys.argv[1])
passwd=str(sys.argv[2])

child=pexpect.spawn('ssh用户@%s'%ip)
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/04IN-FG3950B.txt','w')
child.logfile=fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect('W-IN-FG3950-1#')
child.sendline("getsysperformancestatus")
foriinrange(5):
index=child.expect(["(?i)--More--","W-IN-FG3950-1#"])
if(index==0):
child.send("")
else:
child.sendline("diagnosesyssessionstat")
break
child.expect('W-IN-FG3950-1#')
child.sendline("getrouteinforouting-tablestatic")
child.expect('--More--')
child.send('')
child.expect('W-IN-FG3950-1#')
child.sendline("exit")

05_06DMZ-S9306.py#华为S9306交互脚本

#!/usr/bin/envpython
importpexpect
importsys
importdatetime

d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b%d')
today=datetime.date.today().strftime('%Y%m%d')

tt=tdy.split()
ifint(tt[-1])<10:
tdy=tdy.replace('0','')

ip=str(sys.argv[1])
passwd=str(sys.argv[2])
password=str(sys.argv[3])

child=pexpect.spawn('ssh用户名@%s'%ip)

ifip=='判断ip，不止一个该类型设备':
txt='05DMZ-S9306-1.txt'
else:
txt='06DMZ-S9306-2.txt'

fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile=fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect('
07_08-S12508.py#H3CS12508交互脚本
#!/usr/bin/envpython
importpexpect
importsys
importdatetime
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b%d')
today=datetime.date.today().strftime('%Y%m%d')

tt=tdy.split()
ifint(tt[-1])<10:
tdy=tdy.replace('0','')

ip=str(sys.argv[1])
passwd=str(sys.argv[2])
password=str(sys.argv[3])

child=pexpect.spawn('ssh用户名@%s'%ip)

IP=['ip1','ip2']

ifip==IP[0]:
txt='07DMZ-S12508.txt'
name=''
else:
txt='08IN-S12508.txt'
name=''

fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile=fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect("%s"%name)
child.sendline("su")
child.expect("(?i)assword:")
child.sendline("%s"%password)
child.expect("%s"%name)
child.sendline("disdevice|exNormal")
child.expect("%s"%name)
child.sendline("disversion|inH3CS12508")
child.expect("%s"%name)
child.sendline("dir")
child.expect("%s"%name)
child.sendline("dismemory")
child.expect("%s"%name)
child.sendline("disirflink")
foriinrange(10):
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("disintbrief|inUP")
break
foriinrange(20):
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("dismac-addresscount")
break
child.expect("%s"%name)
child.sendline("disarpallcount")
ifip=="手动打码":
child.expect("%s"%name)
child.sendline("disiprouting-tablevpn-instanceDmzprotocolstatic")
foriinrange(20):
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("disiprouting-tablevpn-instanceInsideprotocolstatic")
foriinrange(20):
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("")
break
break
child.expect("%s"%name)
child.sendline("disenvironment")
foriinrange(50):
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("disalarm")
break
child.expect("%s"%name)
child.sendline("dislogbuffer|in%s"%tdy)

foriinrange(50):
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("q")
sys.exit()
09_10SM-N7K.py#CiscoN7K交互脚本
#!/usr/bin/envpython
importpexpect
importsys
importdatetime
today=datetime.date.today().strftime('%Y%m%d')

ip=str(sys.argv[1])
passwd=str(sys.argv[2])

child=pexpect.spawn('telnet%s'%ip)


ifip=='是个ip':
txt='09SM-N7K-1.txt'
name='W-SM-N7K-1#'
else:
txt='10SM-N7K-2.txt'
name='W-SM-N7K-2#'

fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile=fout
child.expect('login:')
child.sendline("发送用户名")
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect("%s"%name)
child.sendline("shhardware|inok")
child.expect("%s"%name)
child.sendline("shversion|inuptime")
child.expect("%s"%name)
child.sendline("dir")
child.expect("%s"%name)
child.sendline("shintbrief|inup")
foriinrange(10):
index=child.expect(["(?i)More--","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("shhsrpbrief")
break
child.expect("%s"%name)
child.sendline("shmacaddress-tablecount")
child.expect("%s"%name)
child.sendline("shiparp|innumber")
child.expect("%s"%name)
child.sendline("shiproutestaticsummary")
child.expect("%s"%name)
child.sendline("shenvironmenttemperature")
foriinrange(10):
index=child.expect(["(?i)More--","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("shvpc")
break
foriinrange(10):
index=child.expect(["(?i)More--","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("shlogginglast30")
break
foriinrange(10):
index=child.expect(["(?i)More--","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("exit")
sys.exit()
11_12DMZ-NE40E.py#华为NE40E交互脚本
#!/usr/bin/envpython
importpexpect
importsys
importdatetime
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b%d')
today=datetime.date.today().strftime('%Y%m%d')

tt=tdy.split()
ifint(tt[-1])<10:
tdy=tdy.replace('0','')

ip=str(sys.argv[1])
passwd=str(sys.argv[2])

child=pexpect.spawn('ssh用户名@%s'%ip)

IP=['ip1','ip2']

ifip==IP[0]:
txt='11DMZ-NE40E-1.txt'
name=''
elifip==IP[1]:
txt='12DMZ-NE40E-2.txt'
name=''
else:
print"IPInputError!"
sys.exit()

fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile=fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect("(?i)N]:")
child.sendline("n")
child.expect("%s"%name)
child.sendline("disdevice|exNormal")
child.expect("%s"%name)
child.sendline("disversion|inNE40E-X8uptime")
child.expect("%s"%name)
child.sendline("dir")
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("dismemory-usage")
else:
child.sendline("dismemory-usage")
child.expect("%s"%name)
child.sendline("disintbrief|inup")
child.expect("%s"%name)
child.sendline("disiprouting-tableprotocolstatic")
child.expect("%s"%name)
child.sendline("distemperature")
foriinrange(40):
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("disalarmall")
break
child.expect("%s"%name)
child.sendline("dislogbuffer|in%s"%tdy)
foriinrange(30):
index=child.expect(["(?i)----More----","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("q")
break
13_16-RD5412_6420.py#RadwareRD5412交互脚本，只要掌握一个，其他都是套路
#!/usr/bin/envpython
importpexpect
importsys
importdatetime
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b%d')
today=datetime.date.today().strftime('%Y%m%d')

tt=tdy.split()
ifint(tt[-1])<10:
tdy=tdy.replace('0','')

ip=str(sys.argv[1])
passwd=str(sys.argv[2])

child=pexpect.spawn('ssh还是用户名@%s'%ip)

IP=['ip1','ip2','ip3','ip4']

ifip==IP[0]:
txt='13DMZ-RD5412-1.txt'
elifip==IP[1]:
txt='14DMZ-RD5412-2.txt'
elifip==IP[2]:
txt='15SM-RD6420-1.txt'
elifip==IP[3]:
txt='16SM-RD6420-2.txt'
else:
print"IPInputError!"
sys.exit()
name='StandaloneADC(?i)'

fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile=fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
ifip==IP[3]:
child.expect("(?i)y]:")
child.sendline("y")
child.expect("%s"%name)
child.sendline("/i/sys/general")
child.expect("%s"%name)
child.sendline("/i/sys/ps")
child.expect("%s"%name)
child.sendline("/i/sys/fan")
child.expect("%s"%name)
child.sendline("/i/link")
index=child.expect(["Pressqtoquit,anyotherkeytocontinue","%s"%name])
if(index==0):
child.send("")
index=child.expect(["Pressqtoquit,anyotherkeytocontinue","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("/i/sys/capacityslb")
else:
child.sendline("/i/sys/capacityslb")
index=child.expect(["Pressqtoquit,anyotherkeytocontinue","%s"%name])
if(index==0):
child.send("")
index=child.expect(["Pressqtoquit,anyotherkeytocontinue","%s"%name])
if(index==0):
child.send("")
index=child.expect(["Pressqtoquit,anyotherkeytocontinue","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("/stats/mp/cpu")
else:
child.sendline("/stats/mp/cpu")
else:
child.sendline("/stats/mp/cpu")
child.expect("%s"%name)
child.sendline("/stats/mp/mem")
child.expect("%s"%name)
child.sendline("/i/sys/temp")
child.expect("%s"%name)
child.sendline("/i/l3/vrrp")
child.expect("%s"%name)
child.sendline("/i/sys/log")
foriinrange(50):
index=child.expect(["Pressqtoquit,anyotherkeytocontinue","%s"%name])
if(index==0):
child.send("")
else:
child.sendline("exit")
break
#index=child.expect(["(?i)n]:","%s"%name])
#if(index==0):
ifip==IP[3]:
child.expect("(?i)n]:")
child.sendline("y")
#else:
#pass
child.expect("(?i)n]:")
child.sendline("n")
3、编写邮件脚本
mail.py
#!/usr/bin/python
#-*-coding:utf-8-*-
fromemail.headerimportHeader
importsmtplib
importemail.MIMEMultipart#importMIMEMultipart
importemail.MIMEText#importMIMEText
importemail.MIMEBase#importMIMEBase
importos.path
importsys
importmimetypes
importemail.MIMEImage#importMIMEImage
importdatetime


tday=datetime.date.today().strftime('%Y/%m/%d')
#命令mail.py<1:发送方（回复地址）10000@qq.com><2:发送地址，多个以;隔开><3:发送文件>
From="%s<*@139.com>"%Header("XXX","utf-8")
ReplyTo=sys.argv[1]
To=sys.argv[2]
file_name=sys.argv[3]#附件名
file_name1=sys.argv[4]
server=smtplib.SMTP("smtp.139.com",25)
server.login("user@139.com","password")#仅smtp服务器需要验证时

#构造MIMEMultipart对象做为根容器
main_msg=email.MIMEMultipart.MIMEMultipart()

#构造MIMEText对象做为邮件显示内容并附加到根容器
text_msg=email.MIMEText.MIMEText("message内容正文",_charset="utf-8")
main_msg.attach(text_msg)

#构造MIMEBase对象做为文件附件内容并附加到根容器
ctype,encoding=mimetypes.guess_type(file_name)
ifctypeisNoneorencodingisnotNone:
ctype='application/octet-stream'
maintype,subtype=ctype.split('/',1)
file_msg=email.MIMEImage.MIMEImage(open(file_name,'rb').read(),subtype)
file_msg1=email.MIMEImage.MIMEImage(open(file_name1,'rb').read(),subtype)

##设置附件头
basename=os.path.basename(file_name)
file_msg.add_header('Content-Disposition','attachment',filename=basename)#修改邮件头
main_msg.attach(file_msg)

basename1=os.path.basename(file_name1)
file_msg1.add_header('Content-Disposition','attachment',filename=basename1)#修改邮件头
main_msg.attach(file_msg1)

#设置根容器属性
main_msg['From']=From
main_msg['Reply-to']=ReplyTo
#main_msg['To']=To
main_msg['Subject']=u"[每日巡检]%s邮件标题"%tday
main_msg['Date']=email.Utils.formatdate()

#main_msg['Bcc']=To
#得到格式化后的完整文本
fullText=main_msg.as_string()

#用smtp发送邮件
try:
server.sendmail(From,To.split(';'),fullText)
finally:
server.quit()
mail_excel_error.py#报错通知邮件：excel不存在
#!/usr/bin/envpython
#-*-coding:utf-8-*-
#importsys
#reload(sys)
importsmtplib,string,datetime,xlrd

tday=datetime.date.today().strftime('%Y/%m/%d')
HOST="smtp.139.com"
SUBJECT="[每日巡检]%s哈哈哈"%tday
TO="*.com"
FROM="*@139.com"

text="excelnocunzai"

BODY=string.join((
"FROM:%s"%FROM,
"To:%s"%TO,
"Subject:%s"%SUBJECT,
"",
text
),"\r\n")
server=smtplib.SMTP()
server.connect(HOST,"25")
server.starttls()
server.login(FROM,"密码")
server.sendmail(FROM,[TO],BODY)
server.quit()
mail_zip_error.py#邮件告警：巡检历史记录压缩文档不存在
#!/usr/bin/envpython
#-*-coding:utf-8-*-
#importsys
#reload(sys)
importsmtplib,string,datetime,xlrd

tday=datetime.date.today().strftime('%Y/%m/%d')
HOST="smtp.139.com"
SUBJECT="[每日巡检]%s嘻嘻嘻"%tday
TO="asdas.com"
FROM="***@139.com"

text="zipnocunzai"

BODY=string.join((
"FROM:%s"%FROM,
"To:%s"%TO,
"Subject:%s"%SUBJECT,
"",
text
),"\r\n")
server=smtplib.SMTP()
server.connect(HOST,"25")
server.starttls()
server.login(FROM,"PASSWORD")
server.sendmail(FROM,[TO],BODY)
server.quit()
4、数据处理
wangluo_xunjian.py#根据巡检内容制表
#!/usr/bin/envpython
#-*-coding:utf-8-*-
#importsys
#reload(sys)
importxlsxwriter,os,datetime

defcmd(sname,fname):#该函数判断巡检命令行所在输出文件位置
i=1
f=open(fname)
line_hang_list=[]
forlineinf:
ifline.find(sname)==0:
line_hang_list.append(i)
i+=1
f.close
returnline_hang_list

defcmd1(sname,fname):#同上
i=1
f=open(fname)
line_hang_list=[]
forlineinf:
ifsnameinline:
line_hang_list.append(i)
i+=1
f.close
returnline_hang_list

tday=datetime.date.today().strftime('%Y.%m.%d')
today=datetime.date.today().strftime('%Y%m%d')
workbook=xlsxwriter.Workbook(u"/usr/sh/shell/linux/xunjian/%s/网络设备巡检-%s.xlsx"%(today,tday),{'strings_to_numbers':True})

file_01='/usr/sh/shell/linux/xunjian/'+str(today)+'/01DMZ-E8000E.txt'
file_02_1='/usr/sh/shell/linux/xunjian/'+str(today)+'/03SM-M9006.txt'
file_02_2='/usr/sh/shell/linux/xunjian/'+str(today)+'/02DMZ-M9006.txt'
file_03='/usr/sh/shell/linux/xunjian/'+str(today)+'/04IN-FG3950B.txt'


#新建sheet
worksheet0=workbook.add_worksheet(u"防火墙")
worksheet1=workbook.add_worksheet(u"交换机")
worksheet2=workbook.add_worksheet(u"路由器")
worksheet3=workbook.add_worksheet(u"负载")

#设置单元格格式(居中，颜色，边框，合并，列宽，列隐藏等)
colour='#660099'

format_title=workbook.add_format()
format_title.set_border(1)
format_title.set_bottom(2)
format_title.set_bold(1)
format_title.set_font_color('white')
format_title.set_bg_color(colour)
format_title.set_align('center')
format_title.set_valign('vcenter')

format_nr=workbook.add_format()
format_nr.set_border(1)
format_nr.set_bottom(2)
format_nr.set_align('center')
format_nr.set_valign('vcenter')

format_nrr=workbook.add_format()
format_nrr.set_border(1)
format_nrr.set_valign('vcenter')
format_nrr.set_text_wrap()

format_bottom=workbook.add_format()
format_bottom.set_border(1)
format_bottom.set_bottom(2)
format_bottom.set_valign('vcenter')
format_bottom.set_text_wrap()

format_rt=workbook.add_format()
format_rt.set_border(1)
format_rt.set_right(2)
format_rt.set_valign('left')
format_rt.set_text_wrap()

format_right=workbook.add_format()
format_right.set_border(1)
format_right.set_right(2)
format_right.set_bottom(2)
format_right.set_valign('vcenter')
format_right.set_text_wrap()

format_red=workbook.add_format()
format_red.set_font_color('red')
format_red.set_border(1)
format_red.set_right(2)
format_red.set_valign('vcenter')

format_rd=workbook.add_format()
format_rd.set_font_color('red')
format_rd.set_border(1)
format_rd.set_right(2)
format_rd.set_bottom(2)
format_rd.set_valign('vcenter')

#填写相关固定单元格内容
firewall_title=[u'设备名称',u'设备类型',u'IP地址',u'检查项',u'命令',u'说明',u'检查结果']

firewall_jc=[u'设备状态',u'运行时长',u'运行温度',u'Flash状态',u'CPU使用率',u'内存使用率',u'冗余组状态',u'session数目',u'路由条数',u'端口状态',u'策略条数',u'告警',u'日志',u'板卡状态',u'运行时长',u'运行温度',u'Flash状态',u'CPU使用率',u'内存使用率',u'堆叠状态',u'冗余组状态',u'session数目',u'路由条数',u'端口状态',u'策略条数',u'告警',u'日志',u'板卡状态',u'运行时长',u'运行温度',u'Flash状态',u'CPU使用率',u'内存使用率',u'堆叠状态',u'冗余组状态',u'session数目',u'路由条数',u'端口状态',u'策略条数',u'告警',u'日志',u'运行时长',u'CPU使用率(BOMC看)',u'内存使用率',u'网络流量',u'session数目',u'新建session速率',u'接口状态',u'冗余组状态',u'路由条数',u'日志',u'策略条数',u'告警']

firewall_cmd=['disdevice|exNormal','disversion','distemperature','dir',u'在BOMC看','dismemory-usage','dishrpstate','disfirewallsessiontable','disiprouting-tableprotocolstatic','disintbrief(dislogbuffer|inDOWN)','disacl3004(3004-3007)','disalarmall','dislogbuffer|in[data]','disdevice|exNormal','disversion|inuptime','disenvironment','dir|intotal',u'在BOMC看','dismemory','disirflink','disredundancygroup','dissessionstatisticssummary','disiprouting-tableprotocolstatic','disintbrief(dislogbuffer|inDOWN)','disobject-policyip','disalarm','dislogbuffer|in[month]','disdevice|exNormal','disversion|inuptime','disenvironment','dir|intotal',u'在BOMC看','dismemory','disirflink','disredundancygroup','dissessionstatisticssummary','disiprouting-tableprotocolstatic','disintbrief(dislogbuffer|inDOWN)','disaclall','disalarm','dislogbuffer|in[month]','getsysperformancestatus','','','','diagnosesyssessionstat','',u'网页登录查看',u'网页登录查看','getrouteinforoutingtablestatic',u'网页登录查看',u'网页登录查看',u'网页登录查看']

firewall_sm=[u'填写Status是Abnormal的项',u'填写已运行天数,小时数',u'填写温度范围',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写本机和邻居的角色，看有无发生主备切换',u'填写链接总数',u'填写路由数目',u'填写状态为UP的端口数目',u'填写策略数目',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”',u'填写State为Absent，且Type不为NONE的项',u'填写已运行天数，小时数',u'填写温度范围',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率范围',u'填写Status不是UP的项',u'填写Status，看有无发生主备切换',u'填写链接总数',u'填写路由数目',u'填写状态为UP的端口数目',u'填写策略数目(所有rule的总数)',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”',u'填写State为Absent，且Type不为NONE的项',u'填写已运行天数，小时数',u'填写温度范围',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率范围',u'填写Status不是UP的项',u'填写Status，看有无发生主备切换',u'填写链接总数',u'填写路由数目',u'填写状态为UP的端口数目',u'填写策略数目(acl3001+3002的总条目数)',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”',u'填写已运行天数，小时数',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写30分钟内平均带宽占用（kbps）',u'填写session_count值',u'填写setup_rate值',u'填写启用状态的接口数目',u'填写冗余状态',u'填写路由数目',u'填写异常日志，无异常则填写“正常”',u'填写策略数目',u'填写告警内容，无告警则填写“无告警”']


switch_title=[u'设备名称',u'设备类型',u'IP地址',u'检查项',u'命令',u'说明',u'检查结果']

switch_jc=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'接口状态',u'VRRP状态',u'MAC地址条目数',u'ARP条目数',u'路由条目数',u'运行温度',u'告警',u'日志']
switch_jc1=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'堆叠状态',u'接口状态',u'MAC地址条目数',u'ARP条目数',u'路由条目数',u'运行温度',u'告警',u'日志']

switch_jc2=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'堆叠状态',u'接口状态',u'MAC地址条目数',u'ARP条目数',u'运行温度',u'告警',u'日志']

switch_cmd=['disdevice','disversion|inQuidway','dir','discpu-usage','dismemory-usage','disintbrief(dislogbuffer|inIF_STATE)','disvrrpbrief','dismac-addresstotal-number','disarpstatisticsall','disiprouting-tableprotocolstatic','distemperatureall','disalarmall','dislogbuffer|in[date]']

switch_cmmd=['disdevice|exNormal','disversion|inH3CS12508','dir',u'在BOMC看','dismemory','disirflink','disintbrief(dislogbufferreverse|inUPDOWN)','dismac-addresscount','disarpallcount','disiprouting-tablevpn-instanceDmz/Insideprotocolstatic','disenvironment','disalarm','dislogbufferreverse|in[date]']

switch_cmd1=['disdevice|exNormal','disversion|inH3CS12508','dir',u'在BOMC看','dismemory','disintbrief(dislogbufferreverse|inUPDOWN)','disvrrp','dismac-addresscount','disarpallcount','disiprouting-tableprotocolstatic','disenvironment','disalarm','dislogbufferreverse|in[date]']

switch_cmd2=['disdevice|exNormal','disversion|inH3CS12508','dir',u'在BOMC看','dismemory','disirflink','disintbrief(dislogbufferreverse|inUPDOWN)','dismac-addresscount','disarpallcount','disenvironment','disalarm','dislogbufferreverse|in[date]']

switch_sm=[u'查看电源、风扇以及板卡状态，填写异常项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率',u'填写内存使用率',u'填写状态为UP的端口数目',u'查看VRRP主备状态',u'填写总的mac-address条目数',u'填写动态和静态ARP条目数',u'填写路由数目',u'填写温度范围',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”']

switch_ssm=[u'填写状态异常的项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写Status不是UP的项',u'填写状态为UP的端口数目',u'填写总的mac-address条目数',u'填写总的ARP条目数',u'填写路由数目(Dmz和Inside路由总和)',u'填写温度范围',u'填写设备告警，无则填写“无告警”',u'填写异常日志，无异常则填写“正常”']

switch_sm1=[u'填写状态异常的项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写状态为UP的端口数目',u'查看VRRP主备状态',u'填写总的mac-address条目数',u'填写总的ARP条目数',u'填写路由数目',u'填写温度范围',u'填写设备告警，无则填写“无告警”',u'填写异常日志，无异常则填写“正>常”']

switch_sm2=[u'填写状态异常的项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写Status不是UP的项',u'填写状态为UP的端口数目',u'填写总的mac-address条目数',u'填写总的ARP条目数',u'填写温度范围',u'填写设备告警，无则填写“无告警”',u'填写异常日志，无异常则填写“正>常”']

route_title=[u'设备名称',u'设备类型',u'IP地址',u'检查项',u'命令',u'说明',u'检查结果']

route_jc=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'接口状态',u'路由条数',u'运行温度',u'告警',u'日志']

route_cmd=['disdevice|exNormal','disversion|inNE40E-X8uptime','dir',u'在BOMC看','dismemory-usage','disintbrief(dislogbuffer|inIF_STATE)','disiprouting-tableprotocolstatic','distemperature','disalarmall','dislogbuffer|in[date]']

route_sm=[u'填写Status不是“Normal”的项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写状态为UP的端口数目',u'填写路由数目',u'填写温度范围',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”']

fuzai_title=[u'设备名称',u'设备类型',u'IP地址',u'检查项',u'命令',u'说明',u'检查结果']

fuzai_jc=[u'运行时长',u'电源状态',u'风扇状态',u'端口状态',u'各表项数值',u'CPU使用率',u'内存使用率',u'硬件温度',u'冗余状态',u'日志']

fuzai_cmd=['/i/sys/general','/i/sys/ps','/i/sys/fan','/i/link','/i/sys/capacityslb','/stats/mp/cpu','/stats/mp/mem','/i/sys/temp','/i/l3/vrrp','/i/sys/log']

fuzai_sm=[u'填写已运行天数，小时数',u'填写电源状态',u'填写风扇状态',u'填写Link处于UP状态的端口数',u'填写realservers/servergroups/virtualservers/filters当前值',u'填写CPU使用率',u'填写内存使用率',u'填写温度',u'填写VRRP状态，"master"或者"backup"',u'填写异常日志，无异常则填写“正常”']

newsmswitch_title=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'接口状态',u'HSRP状态',u'MAC地址条目数',u'ARP条目数',u'路由条目数',u'运行温度',u'VPC状态',u'日志']
newsmswitch_cmd=['shhardware|inok','shversion|inuptime','dir',u'在BOMC看',u'在BOMC看','shintbrief(shintbrief|inup)','shhsrpbrief','shmacaddress-tablecount','shiparp|innumber','shiproutestaticsummary','shenvironmenttemperature','shvpc','shlogginglast30']

newsmswitch_sm=[u'填写状态为OK的模块数',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写状态为UP的端口数目',u'查看HSRP状态(Activelocal则正常)',u'填写总的mac-address条目数',u'填写总的ARP条目数',u'填写路由数目',u'填写CurTemp范围',u'查看VPC状态是否正常',u'查看日志，无异常则填写"正常"']

#ip我就隐藏掉啦,虽然也没什么意思
host={"DMZ-E8000E":[u'防火墙',"ip1"],"DMZ-M9006":[u'防火墙','ip2'],"SM-M9006":[u'防火墙','ip3'],"IN-FG3950B":[u'防火墙',"ip4"],"DMZ-S9306-1":[u'交换机',"ip5"],"DMZ-S9306-2":[u'交换机',"ip6"],"DMZ-S12508":[u'交换机',"ip7"],"IN-S12508":[u'交换机',"ip8"],"SM-S12508-1":[u'交换机',"ip9"],"SM-S12508-2":[u'交换机',"ip10"],"DMZ-NE40E-1":[u'路由器',"ip11"],"DMZ-NE40E-2":[u'路由器',"ip12"],"DMZ-RD5412-1":[u'负载',"ip13"],"DMZ-RD5412-2":[u'负载',"ip14"],"SM-RD6420-1":[u'负载',"ip15"],"SM-RD6420-2":[u'负载',"ip16"],"SM-N7K-1":[u"交换机","ip17"],"SM-N7K-2":[u"交换机","ip18"]}

#开始填写固定单元格内容
worksheet0.write_row('A1',firewall_title,format_title)
worksheet0.merge_range('A2:A14','DMZ-E8000E',format_nr)
worksheet0.merge_range('B2:B14',host["DMZ-E8000E"][0],format_nr)
worksheet0.merge_range('C2:C14',host["DMZ-E8000E"][1],format_nr)
worksheet0.merge_range('A15:A28','DMZ-M9006',format_nr)
worksheet0.merge_range('B15:B28',host["DMZ-M9006"][0],format_nr)
worksheet0.merge_range('C15:C28',host["DMZ-M9006"][1],format_nr)
worksheet0.merge_range('A29:A42','SM-M9006',format_nr)
worksheet0.merge_range('B29:B42',host["SM-M9006"][0],format_nr)
worksheet0.merge_range('C29:C42',host["SM-M9006"][1],format_nr)
worksheet0.merge_range('A43:A54','IN-FG3950B',format_nr)
worksheet0.merge_range('B43:B54',host["IN-FG3950B"][0],format_nr)
worksheet0.merge_range('C43:C54',host["IN-FG3950B"][1],format_nr)
worksheet0.merge_range('E43:E46','getsysperformancestatus',format_nrr)
worksheet0.merge_range('E47:E48','diagnosesyssessionstat',format_nrr)
worksheet0.write_column('D2',firewall_jc,format_nrr)
worksheet0.write_column('E2',firewall_cmd,format_nrr)
worksheet0.write_column('F2',firewall_sm,format_nrr)
worksheet0.write('D14',u'日志',format_bottom)
worksheet0.write('E14','dislogbuffer|in[data]',format_bottom)
worksheet0.write('F14',u'填写异常日志，无异常则填写“正常”',format_bottom)
worksheet0.write('D28',u'日志',format_bottom)
worksheet0.write('E28','dislogbufferreverse|in[month]',format_bottom)
worksheet0.write('F28',u'填写异常日志，无异常则填写“正常”',format_bottom)
worksheet0.write('D42',u'日志',format_bottom)
worksheet0.write('E42','dislogbufferreverse|in[month]',format_bottom)
worksheet0.write('F42',u'填写异常日志，无异常则填写“正常”',format_bottom)
worksheet0.write('D54',u'告警',format_bottom)
worksheet0.write('E54',u'网页登录查看',format_bottom)
worksheet0.write('F54',u'填写告警内容，无告警则填写“无告警”',format_bottom)
worksheet0.set_row(0,30)
worksheet0.set_column('B:B',15,None,{'hidden':1})
worksheet0.set_column('E:F',40,None,{'hidden':1})
worksheet0.set_column('A:A',15)
worksheet0.set_column('C:D',15)
worksheet0.set_column('G:G',40)

worksheet1.write_row('A1',switch_title,format_title)
worksheet1.merge_range('A2:A14','DMZ-S9306-1',format_nr)
worksheet1.merge_range('B2:B14',host["DMZ-S9306-1"][0],format_nr)
worksheet1.merge_range('C2:C14',host["DMZ-S9306-1"][1],format_nr)
worksheet1.merge_range('A15:A27','DMZ-S9306-2',format_nr)
worksheet1.merge_range('B15:B27',host["DMZ-S9306-2"][0],format_nr)
worksheet1.merge_range('C15:C27',host["DMZ-S9306-2"][1],format_nr)
worksheet1.merge_range('A28:A40','DMZ-S12508',format_nr)
worksheet1.merge_range('B28:B40',host["DMZ-S12508"][0],format_nr)
worksheet1.merge_range('C28:C40',host["DMZ-S12508"][1],format_nr)
worksheet1.merge_range('A41:A52','IN-S12508',format_nr)
worksheet1.merge_range('B41:B52',host["IN-S12508"][0],format_nr)
worksheet1.merge_range('C41:C52',host["IN-S12508"][1],format_nr)

worksheet1.merge_range('A53:A65','SM-N7K-1',format_nr)
worksheet1.merge_range('B53:B65',host["SM-N7K-1"][0],format_nr)
worksheet1.merge_range('C53:C65',host["SM-N7K-1"][1],format_nr)
worksheet1.merge_range('A66:A78','SM-N7K-2',format_nr)
worksheet1.merge_range('B66:B78',host["SM-N7K-2"][0],format_nr)
worksheet1.merge_range('C66:C78',host["SM-N7K-2"][1],format_nr)

worksheet1.write_column('D2',switch_jc,format_nrr)
worksheet1.write_column('D15',switch_jc,format_nrr)
worksheet1.write_column('D28',switch_jc1,format_nrr)
worksheet1.write_column('D41',switch_jc2,format_nrr)
worksheet1.write_column('D53',newsmswitch_title,format_nrr)
worksheet1.write_column('D66',newsmswitch_title,format_nrr)
worksheet1.write_column('E2',switch_cmd,format_nrr)
worksheet1.write_column('E15',switch_cmd,format_nrr)
worksheet1.write_column('E28',switch_cmmd,format_nrr)
worksheet1.write_column('E41',switch_cmd2,format_nrr)
worksheet1.write_column('E53',newsmswitch_cmd,format_nrr)
worksheet1.write_column('E66',newsmswitch_cmd,format_nrr)
worksheet1.write_column('F2',switch_sm,format_nrr)
worksheet1.write_column('F15',switch_sm,format_nrr)
worksheet1.write_column('F28',switch_ssm,format_nrr)
worksheet1.write_column('F41',switch_sm2,format_nrr)
worksheet1.write_column('F53',newsmswitch_sm,format_nrr)
worksheet1.write_column('F66',newsmswitch_sm,format_nrr)
worksheet1.set_row(0,30)
worksheet1.set_column('B:B',15,None,{'hidden':1})
worksheet1.set_column('E:F',40,None,{'hidden':1})
worksheet1.set_column('A:A',15)
worksheet1.set_column('C:D',15)
worksheet1.set_column('G:G',40)


worksheet2.write_row('A1',route_title,format_title)
worksheet2.merge_range('A2:A11','DMZ-NE40E-1',format_nr)
worksheet2.merge_range('B2:B11',host["DMZ-NE40E-1"][0],format_nr)
worksheet2.merge_range('C2:C11',host["DMZ-NE40E-1"][1],format_nr)
worksheet2.merge_range('A12:A21','DMZ-NE40E-2',format_nr)
worksheet2.merge_range('B12:B21',host["DMZ-NE40E-2"][0],format_nr)
worksheet2.merge_range('C12:C21',host["DMZ-NE40E-2"][1],format_nr)
worksheet2.write_column('D2',route_jc,format_nrr)
worksheet2.write_column('D12',route_jc,format_nrr)
worksheet2.write_column('E2',route_cmd,format_nrr)
worksheet2.write_column('E12',route_cmd,format_nrr)
worksheet2.write_column('F2',route_sm,format_nrr)
worksheet2.write_column('F12',route_sm,format_nrr)
worksheet2.set_row(0,30)
worksheet2.set_column('B:B',15,None,{'hidden':1})
worksheet2.set_column('E:F',40,None,{'hidden':1})
worksheet2.set_column('A:A',15)
worksheet2.set_column('C:D',15)
worksheet2.set_column('G:G',40)

worksheet3.write_row('A1',fuzai_title,format_title)
worksheet3.merge_range('A2:A11','DMZ-RD5412-1',format_nr)
worksheet3.merge_range('B2:B11',host["DMZ-RD5412-1"][0],format_nr)
worksheet3.merge_range('C2:C11',host["DMZ-RD5412-1"][1],format_nr)
worksheet3.merge_range('A12:A21','DMZ-RD5412-2',format_nr)
worksheet3.merge_range('B12:B21',host["DMZ-RD5412-2"][0],format_nr)
worksheet3.merge_range('C12:C21',host["DMZ-RD5412-2"][1],format_nr)
worksheet3.merge_range('A22:A31','SM-RD6420-1',format_nr)
worksheet3.merge_range('B22:B31',host["SM-RD6420-1"][0],format_nr)
worksheet3.merge_range('C22:C31',host["SM-RD6420-1"][1],format_nr)
worksheet3.merge_range('A32:A41','SM-RD6420-2',format_nr)
worksheet3.merge_range('B32:B41',host["SM-RD6420-2"][0],format_nr)
worksheet3.merge_range('C32:C41',host["SM-RD6420-2"][1],format_nr)
worksheet3.write_column('D2',fuzai_jc,format_nrr)
worksheet3.write_column('D12',fuzai_jc,format_nrr)
worksheet3.write_column('D22',fuzai_jc,format_nrr)
worksheet3.write_column('D32',fuzai_jc,format_nrr)
worksheet3.write_column('E2',fuzai_cmd,format_nrr)
worksheet3.write_column('E12',fuzai_cmd,format_nrr)
worksheet3.write_column('E22',fuzai_cmd,format_nrr)
worksheet3.write_column('E32',fuzai_cmd,format_nrr)
worksheet3.write_column('F2',fuzai_sm,format_nrr)
worksheet3.write_column('F12',fuzai_sm,format_nrr)
worksheet3.write_column('F22',fuzai_sm,format_nrr)
worksheet3.write_column('F32',fuzai_sm,format_nrr)
worksheet3.set_row(0,30)
worksheet3.set_column('B:B',15,None,{'hidden':1})
worksheet3.set_column('E:F',40,None,{'hidden':1})
worksheet3.set_column('A:A',15)
worksheet3.set_column('C:D',15)
worksheet3.set_column('G:G',40)

jcx=[u'日志','dislogbuffer|in[date]',u'填写异常日志，无异常则填写“正常”']
jcx1=[u'日志','dislogbufferreverse|in[date]',u'填写异常日志，无异常则填写“正常”']
jcx2=[u'日志','shlogginglast30',u'查看日志，无异常则填写“正常”']

fuzai_jcx=[u'日志','/i/sys/log',u'填写异常日志，无异常则填写“正常”']
worksheet1.write_row('D14',jcx,format_bottom)
worksheet1.write_row('D27',jcx,format_bottom)
worksheet1.write_row('D40',jcx,format_bottom)
worksheet1.write_row('D52',jcx1,format_bottom)
worksheet1.write_row('D65',jcx2,format_bottom)
worksheet1.write_row('D78',jcx2,format_bottom)
worksheet2.write_row('D11',jcx,format_bottom)
worksheet2.write_row('D21',jcx,format_bottom)
worksheet3.write_row('D11',fuzai_jcx,format_bottom)
worksheet3.write_row('D21',fuzai_jcx,format_bottom)
worksheet3.write_row('D31',fuzai_jcx,format_bottom)
worksheet3.write_row('D41',fuzai_jcx,format_bottom)

#这边开始根据之前与设备交互所得到的数据文件内容来填格子了。

#------------------------------------------------
#----------firewall_ip1----------------
#------------------------------------------------

try:
hang=1
temp=[]
hang_list=cmd("HRP_M",file_01)
rules=[]
g=0
withopen(file_01)asf:
foreach_lineinf:
num=each_line.split()
ifhang>int(hang_list[1])andhangint(hang_list[2])andhangint(hang_list[3])andhangint(hang_list[4])andhangint(hang_list[5])andhangint(hang_list[6])andhangint(hang_list[7])andhangint(hang_list[8])andhangint(hang_list[9])andhangint(hang_list[10])andhangint(hang_list[14])andhangint(hang_list[15])andhang",file_02_2)
temp=[]
rules=0
mem=[]
g=0
all=0
n=0
level=0
q=0
status=0
type=0
withopen(file_02_2)asf:
foreach_lineinf:
num=each_line.split()
ifhang>int(hang_list[0])andhangint(hang_list[1])andhangint(hang_list[2])andhangint(hang_list[3])andhangint(hang_list[4])andhangint(hang_list[5])andhangint(hang_list[6])andhangint(hang_list[7])andhangint(hang_list[8])andhangint(hang_list[9])andhang=4andnum[1]=='UP':
all+=1
ifhang>int(hang_list[10])andhangint(hang_list[12])andhang5:
ifnum[3]!='INFO':
level=1
ifhang>int(hang_list[13])andhang",file_02_1)
temp=[]
rules=[]
mem=[]
g=0
all=0
n=0
level=0
q=0
status=0
type=0
withopen(file_02_1)asf:
foreach_lineinf:
num=each_line.split()
ifhang>int(hang_list[0])andhangint(hang_list[1])andhangint(hang_list[2])andhangint(hang_list[3])andhangint(hang_list[4])andhangint(hang_list[5])andhangint(hang_list[6])andhangint(hang_list[7])andhangint(hang_list[8])andhangint(hang_list[9])andhang=4andnum[1]=='UP':
all+=1
ifhang>int(hang_list[10])andhangint(hang_list[12])andhang5:
ifnum[3]!='INFO':
level=1
ifhang>int(hang_list[13])andhangint(hang_list[0])andhangint(hang_list[1])andhangint(hang_list[2])andhang=6:
g+=1
hang+=1
worksheet0.write('G51',g,format_rt)
worksheet0.write('G44',None,format_rt)
worksheet0.write('G49',None,format_rt)
worksheet0.write('G50',None,format_rt)
worksheet0.write('G52',None,format_rt)
worksheet0.write('G53',None,format_rt)
worksheet0.write('G54',None,format_right)
exceptIOErrorasreason:
print"04IN-FG3950B.py"+str(reason)

#------------------------------------------------
#------------switch_ip5----------------
#------------switch_ip6----------------
#------------------------------------------------
try:
foriinrange(2):
hang=1
alarm=0
state=0
status=0
alm=0
temp_list=[]
index={0:list(range(2,15)),1:list(range(15,28))}
file='/usr/sh/shell/linux/xunjian/'+str(today)+'/0'+str(i+5)+'DMZ-S9306-'+str(i+1)+'.txt'
hang_list=cmd(''%(i+1),file)
withopen(file)asf:
foreach_lineinf:
num=each_line.split()
ifhang>int(hang_list[1])andhangint(hang_list[2])andhangint(hang_list[3])andhangint(hang_list[4])andhangint(hang_list[5])andhangint(hang_list[6])andhang=6andnum[1]=='up':
state+=1
ifhang>int(hang_list[7])andhangint(hang_list[8])andhangint(hang_list[9])andhangint(hang_list[10])andhangint(hang_list[11])andhang=6andnum[-5].isdigit():
temp=num[-1].split('.')
temp_list.append(temp[0])
ifhang>int(hang_list[12])andhangint(hang_list[13])andhang']
state=[]
foriinrange(1):
hang=1
file='/usr/sh/shell/linux/xunjian/'+str(today)+'/'+fi_list[i]
hang_list=cmd(fi_name[i],file)
brd_status=['Master','Slave','Absent']
brd=0
link=0
Master=0
Backup=0
count=[]
temp=[]
alarm=0
status=0
index={0:list(range(28,41))}
withopen(file)asf:
foreach_lineinf:
num=each_line.split()
ifhang>int(hang_list[1])andhangint(hang_list[2])andhangint(hang_list[3])andhangint(hang_list[4])andhangint(hang_list[5])andhangint(hang_list[6])andhang=2andnum[1]=='UP':
link+=1
#ifnum[0]=='----'andnum[5]=='UP':
#link+=1
ifhang>int(hang_list[7])andhangint(hang_list[8])andhangint(hang_list[9])andhangint(hang_list[11])andhangint(hang_list[12])andhang=8:
ifnum[3].isdigit():
temp.append(num[3])
ifnum[0]=='----'andnum[1]=='More':
temp.append(num[7])
ifhang>int(hang_list[13])andhangint(hang_list[14])andhang

对Python 网络设备巡检脚本的实例讲解

热门推荐

随机推荐