PyQt5实现类似别踩白块游戏
本文实例为大家分享了PyQt5实现类似别踩白块游戏的具体代码，供大家参考，具体内容如下
#引入可能用到的库
fromPyQt5.QtWidgetsimport(QWidget,QApplication,QPushButton,QMessageBox,QLabel,QDesktopWidget,QMainWindow)
fromPyQt5.QtCoreimportQt,QRect,QSize,QPoint,QTimer
fromPyQt5.QtGuiimportQPainter,QFont,QColor,QPen,QIcon,QBrush
importsys
importrandom
classmainForm(QMainWindow):
def__init__(self):
super().__init__()
self.initUI()
self.show()
definitUI(self):
self.setWindowTitle("StepGame")
self.setGeometry(0,0,520,360)
self.setWindowIcon(QIcon(R"Doraemon.ico"))
self.center()
self.myBoard=board()
self.myBoard.resize(500,400)
self.myBoard.move(10,10)
self.myBoard.setParent(self)
defcenter(self):
frame=self.frameGeometry()
availableCenter=QDesktopWidget().availableGeometry().center()
frame.moveCenter(availableCenter)
self.move(frame.topLeft())
classboard(QWidget):
def__init__(self):
super().__init__()
self.initUI()
self.initPath()
self.isStarted=False
definitUI(self):
_font=QFont("Romantimes",16,QFont.Bold)
self.tipLabel=QLabel("加油！",self)
self.tipLabel.setFont(_font)
self.tipLabel.move(300,310)
self.timingLabel=QLabel("0S",self)
self.timingLabel.move(200,310)
self.timingLabel.setFont(_font)
self.startButton=QPushButton("开始",self)
self.startButton.setFont(_font)
self.startButton.move(20,310)
self.startButton.clicked.connect(self.start)
self.costTimer=QTimer()
self.costTimer.timeout.connect(self.tick)
self.myPainter=QPainter()
#让这个整个控件获得焦点
self.setFocusPolicy(Qt.StrongFocus)
#为了不让按钮获得焦点
self.startButton.setFocusPolicy(Qt.NoFocus)
definitPath(self):
self.queue=[[0,0,0],[1,2,3]]
foriinrange(100):#从123中随机选取2个数字
_num=random.randint(1,3)
_oneTowThree=[1,2,3]
_oneTowThree.remove(_num)
self.queue.append(_oneTowThree)
foriinrange(5):#地图的最后有空的方块
self.queue.append([])
defstart(self):
self.isStarted=True
self.currentX=1
self.timeCost=0
self.currentY=random.randint(1,3)
self.previouY=self.currentY
self.costTimer.start(1000)
self.repaint()
deftick(self):
self.timeCost+=1
self.timingLabel.setText(str(self.timeCost)+"S")
defpaintEvent(self,e):
#点击开始之前，currenX变量还没有初始化，下面的代码会引用这个变量，导致出错
ifself.isStarted==False:return
#开始画图
self.myPainter.begin(self)
#画背景
self.drawBackGround()
interval=2#方块之间的间隔的二分之一
#画场景
foriinrange(5):
_item=self.queue[i+self.currentX-1]
for_numin_item:
#确定每个方块的位置和大小
_startPoint=QPoint(i*(100+interval),(_num-1)*(100+interval))
_size=QSize((100-2*interval),(100-2*interval))
#设置画笔和画刷
self.myPainter.setPen(QColor.fromRgb(255,255,255))
self.myPainter.setBrush(QColor.fromRgb(205,211,159))
#画方块们
self.myPainter.drawRect(QRect(_startPoint,_size))
#画currentMe
#设置画笔和画刷
_myPen=QPen(Qt.white)
self.myPainter.setPen(_myPen)#pen用来画边框
self.myPainter.setBrush(QColor.fromRgb(105,139,105))
#确定每个方块的位置和大小
_startPoint=QPoint(100+interval,(100+interval)*(self.currentY-1))
_size=QSize((100-2*interval),(100-2*interval))
#画方块
self.myPainter.drawRect(QRect(_startPoint,_size))
#结束画图
self.myPainter.end()
defdrawBackGround(self):
_myPen=QPen(Qt.white)
self.myPainter.setPen(_myPen)#pen用来画边框
self.myPainter.setBrush(QColor.fromRgb(255,239,124))
_tempSize=self.size()
_newSize=QSize(_tempSize.width(),_tempSize.height()-100)
_startPoint=QPoint(0,0)
self.myPainter.drawRect(QRect(_startPoint,_newSize))
defkeyPressEvent(self,kEvent):
ifself.isStarted==False:return
_k=kEvent.key()
#每次只能走相邻的格子
if_k==Qt.Key_Up:
ifself.currentY==1:
_nextY=1
else:
_nextY=self.currentY-1
elif_k==Qt.Key_Down:
ifself.currentY==3:
_nextY=3
else:
_nextY=self.currentY+1
elif_k==Qt.Key_Left:
return#未定义事件
elif_k==Qt.Key_Right:
_nextY=self.currentY
else:
return
if_nextYnotinself.queue[self.currentX+1]:
QMessageBox.warning(self,"StepGame","掉坑里了,用时+3S",QMessageBox.Ok)
self.timeCost+=3
else:
self.currentX+=1
self.previouY=self.currentY
self.currentY=_nextY
self.sceneForward()#场景往前走一步
defsceneForward(self):
ifself.currentX==101:
self.costTimer.stop()
_reply=QMessageBox.question(self,'恭喜你闯关成功',"总耗时秒"+str(self.timeCost)+"
Restartorquit?
PressYestorestartorpressnotoquitthisgame.",
QMessageBox.No|QMessageBox.Yes,
QMessageBox.Yes)
if_reply==QMessageBox.Yes:
self.start()
else:
self.parent().close()
self.repaint()
if__name__=='__main__':
app=QApplication(sys.argv)
ex=mainForm()
sys.exit(app.exec_())
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持毛票票。